JPA 4-47 PM1 15 A-A-BBVP
Product Code: JPA 4-47 PM1
Availability: In Stock
PREFER CONTACT KENT
JPA 4-47 PM1 15 A-A-BBVP
The JPA PT is an pressure booster unit consisting of a JPA pump, a pressure switch, a pressure gauge and a diaphragm tank. The pressure switch automatically starts the pump according to demand. The diaphragm tank ensures a controlled pressure in the water supply and thereby limits the switching frequency of the pump in case of low water consumption or leakage loss. Furthermore, the diaphragm tank increases system comfort by compensating for pressure drops when a tap is opened, and finally it reduces problems with water hammer in the pipework.
| Liquid: | ||
| Pumped liquid: | Water | |
| Liquid temperature range: | 0 .. 35 °C | |
| Liquid temperature during operation: | 20 °C | |
| Density: | 998.2 kg/m³ | |
| Technical: | ||
| Primary shaft seal: | BBVP | |
| Approvals on nameplate: | CE | |
| Curve tolerance: | ISO9906:2012 3B | |
| Materials: | ||
| Pump housing: | Cast iron | |
| EN 1561 EN-GJL-200 | ||
| Impeller: | Composite | |
| Installation: |
| Range of ambient temperature: | -10 .. 40 °C | |
| Maximum operating pressure: | 8 bar | |
| Pump inlet: | G 1 | |
| Pump outlet: | G 1 | |
| Electrical data: | ||
| Power input - P1: | 850 W | |
| Mains frequency: | 50 Hz | |
| Rated voltage: | 1 x 220-240 V | |
| Rated current: | 3.8 A | |
| Capacitor size - run: | 13 µF/450 V | |
| Enclosure class (IEC 34-5): | IP44 | |
| Insulation class (IEC 85): | F | |
| Length of cable: | 1.5 m | |
| Type of cable plug: | UK | |
| Others: | ||
| Net weight: | 13 kg | |
| Gross weight: | 14 kg | |
